This Rom Is Official Rom For Symphony W-35 & You Can Use Any Flash Tools For This Rom As like Piranha Smartphone Flash Tools ETC .
Flashing the whole ROM
- First of all open SP Flash Tool, then click Scatter-loading button to load the correct scatter file(MT6575 Android scatter emmc.txt or MT6577 Androidscatter_emmc.txt, depending on which device you have) for your device and ignore any message that may appear.
- Turn off your device, remove the battery and replace it after some seconds (and don't turn on the device).
- Press F9 (or hit Download button) and connect your device into the computer via USB data cable. The process will start and a red progress bar will appear.
- After the red progress bar is complete, there will appear a purple progress bar.
- Right after the purple progress bar is complete, a message will appear underneath it: “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
- When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
- You can now safely disconnect your device and turn it on. The process ends here.
Flashing only part of the ROM
- In case you want to flash just one part of the ROM, that is also possible. In the shown example, only recovery image will be flashed. Deselect all parts except the one(s) you want to flash and then press F9 (or hit Download button).
- The tool will immediately show a warning because not all parts are selected, but you should continue anyway. Safely press Yes to continue.
- The download of the chosen partition image will start and after the yellow bar is complete, the popup with the green circle should appear.
- Please note that, even though it isn't mandatory to select it on the list of images to flash, preloader file must be present in the same folder as the other partition(s) that you want to flash, or else device will not be able to enter into download mode.
Attention: Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your device.
Very important warning: Always make sure that you trust the sources of the ROM you download and know that it is meant for your device. After flashing a wrong preloader, your device will be completely dead (can't be powered on, it will not charge and won't be detected anymore by the computer) and there is no way to recover it.
Don t Forget Say Thanks To Koler Gaan |