Some Infos about it :
It can do this :
Read Phone Information
Read Phone Firmware Auto Detection Firmware Name Auto save
Read/Wrtie Full flash for phones
Read/Wrtie eeprom for Nor Flash Phones phones
LCD Backup Before Formatting Auto / Customized
Repair dead phone By writing Flashfile
Upgrade / Downgrade Phone Firmware
Repair Phone Imei
Phone Bring to factory setting state
Read / write NV data
Write Empty Board Support
Format / Manual / safe Format
One Click Touch Screen Calibration
Unlock All level Locks
Read unlock code from Backup Flash data
Auto Repair Security Area
Auto Recalculation Security Area
Repair Badsoftware
Many Other Features Support
To this GSM sets :
MTK – Mediatek-CPU
SPD – Spreadtrum-CPU
Mstar – Mstar-CPU
INF – Infineon-CPU
Coolsand – Coolsand technologies-CPU
Anyka – Anyka-CPU
Age – Agere-CPU
Sky – Skyworks-CPU ,
TI / AD_3G – Texas Instruments / Analogy Devices-CPU
CDMA – CDMA-CPU
ADI / SI
And maybe more , i don't know...
It can do this :
Read Phone Information
Read Phone Firmware Auto Detection Firmware Name Auto save
Read/Wrtie Full flash for phones
Read/Wrtie eeprom for Nor Flash Phones phones
LCD Backup Before Formatting Auto / Customized
Repair dead phone By writing Flashfile
Upgrade / Downgrade Phone Firmware
Repair Phone Imei
Phone Bring to factory setting state
Read / write NV data
Write Empty Board Support
Format / Manual / safe Format
One Click Touch Screen Calibration
Unlock All level Locks
Read unlock code from Backup Flash data
Auto Repair Security Area
Auto Recalculation Security Area
Repair Badsoftware
Many Other Features Support
To this GSM sets :
MTK – Mediatek-CPU
SPD – Spreadtrum-CPU
Mstar – Mstar-CPU
INF – Infineon-CPU
Coolsand – Coolsand technologies-CPU
Anyka – Anyka-CPU
Age – Agere-CPU
Sky – Skyworks-CPU ,
TI / AD_3G – Texas Instruments / Analogy Devices-CPU
CDMA – CDMA-CPU
ADI / SI
And maybe more , i don't know...
Step 1: Download and extract the Bin firmware on your computer.
Step 2: After extracting you will find the piranha box , Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the piranha box and load the Bin File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Write , Select USB Mood Button in the piranha box to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.
Important Notes:[*] Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.
